por página
Definir direção descendente

Itens 1 a 10 num total de 29

Página:
  1. 1
  2. 2
  3. 3
  1. "Width: 80mm | 3.14”Colour: Plan/BlueBlend: E-Glass and PolyFlex StrandsHybrid TapeThe Hybrid Tapes are custom made (purpose built) for surfboard production and have become the industry standard for strengthening the rails and tail area of surfboards, the area’s most affected by high impact and back foot pressure.We have used surfboard E-Glass and infused coloured PolyFlex Strands to give the Hybrid PolyFlex Tapes a unique kinetic flex pattern that is less stiffer then the Hybrid Carbon Tapes. The PolyFlex strands have a fast recoil rate, that when the board is pushed through a turn it flexs against the boards nature rocker. The PolyFlex strands and E-Glass react and spring the board back to its nature rocker curve and in doing creating speed and adding strength at the same time. Industry Uses:Back Rails Manufactures place the Carbon Hybrid Tapes on the back rail of surfboards to prevent the tails from shattering and strengthening the deck from foot compressions.Bottom of the board The Carbon Hybrid Tapes are also used on the bottom of the surfboards to create additional spring or pop out of the board. This is known as a kinetic flex, as the board is place under pressure while in transition, during or out of a turn the board springs back to its natural curvature and delivers additional speed.Full Rail of the board The Carbon Hybrid Tapes are often used along the full length of the surfboard rail with stringerless surfboards. This is to add additional strength or to replace the strength that a timber stringer would provide, therefore creating a Parabolic Frame. The Parabolic Frame helps prevents the board from twisting which increases the liveliness/responsiveness, this also creates a parabolic flex pattern that allows to board to deliver more drive, speed and power.Lay-ups: The Carbon Hybrid Tapes are used during the lamination process. The tapes are place on the foam before the cloth is laminated. Most manufactures mark the area they wish to place the Carbon Hybrid Tapes, and brush a small amount of resin on the foam (to prevent to the Carbon Hybrid Tapes from moving). The Carbon Hybrid Tapes are then placed on the resin (making sure the resin has soaked throu
  2. "Width: 80mm | 3.14”Colour: Plan/GreenBlend: E-Glass and PolyFlex StrandsHybrid TapeThe Hybrid Tapes are custom made (purpose built) for surfboard production and have become the industry standard for strengthening the rails and tail area of surfboards, the area’s most affected by high impact and back foot pressure.We have used surfboard E-Glass and infused coloured PolyFlex Strands to give the Hybrid PolyFlex Tapes a unique kinetic flex pattern that is less stiffer then the Hybrid Carbon Tapes. The PolyFlex strands have a fast recoil rate, that when the board is pushed through a turn it flexs against the boards nature rocker. The PolyFlex strands and E-Glass react and spring the board back to its nature rocker curve and in doing creating speed and adding strength at the same time. Industry Uses:Back Rails Manufactures place the Carbon Hybrid Tapes on the back rail of surfboards to prevent the tails from shattering and strengthening the deck from foot compressions.Bottom of the board The Carbon Hybrid Tapes are also used on the bottom of the surfboards to create additional spring or pop out of the board. This is known as a kinetic flex, as the board is place under pressure while in transition, during or out of a turn the board springs back to its natural curvature and delivers additional speed.Full Rail of the board The Carbon Hybrid Tapes are often used along the full length of the surfboard rail with stringerless surfboards. This is to add additional strength or to replace the strength that a timber stringer would provide, therefore creating a Parabolic Frame. The Parabolic Frame helps prevents the board from twisting which increases the liveliness/responsiveness, this also creates a parabolic flex pattern that allows to board to deliver more drive, speed and power.Lay-ups: The Carbon Hybrid Tapes are used during the lamination process. The tapes are place on the foam before the cloth is laminated. Most manufactures mark the area they wish to place the Carbon Hybrid Tapes, and brush a small amount of resin on the foam (to prevent to the Carbon Hybrid Tapes from moving). The Carbon Hybrid Tapes are then placed on the resin (making sure the resin has soaked thro
  3. "Width: 80mm | 3.14”Colour: Plan/Neon YellowBlend: E-Glass and PolyFlex StrandsHybrid TapeThe Hybrid Tapes are custom made (purpose built) for surfboard production and have become the industry standard for strengthening the rails and tail area of surfboards, the area’s most affected by high impact and back foot pressure.We have used surfboard E-Glass and infused coloured PolyFlex Strands to give the Hybrid PolyFlex Tapes a unique kinetic flex pattern that is less stiffer then the Hybrid Carbon Tapes. The PolyFlex strands have a fast recoil rate, that when the board is pushed through a turn it flexs against the boards nature rocker. The PolyFlex strands and E-Glass react and spring the board back to its nature rocker curve and in doing creating speed and adding strength at the same time. Industry Uses:Back Rails Manufactures place the Carbon Hybrid Tapes on the back rail of surfboards to prevent the tails from shattering and strengthening the deck from foot compressions.Bottom of the board The Carbon Hybrid Tapes are also used on the bottom of the surfboards to create additional spring or pop out of the board. This is known as a kinetic flex, as the board is place under pressure while in transition, during or out of a turn the board springs back to its natural curvature and delivers additional speed.Full Rail of the board The Carbon Hybrid Tapes are often used along the full length of the surfboard rail with stringerless surfboards. This is to add additional strength or to replace the strength that a timber stringer would provide, therefore creating a Parabolic Frame. The Parabolic Frame helps prevents the board from twisting which increases the liveliness/responsiveness, this also creates a parabolic flex pattern that allows to board to deliver more drive, speed and power.Lay-ups: The Carbon Hybrid Tapes are used during the lamination process. The tapes are place on the foam before the cloth is laminated. Most manufactures mark the area they wish to place the Carbon Hybrid Tapes, and brush a small amount of resin on the foam (to prevent to the Carbon Hybrid Tapes from moving). The Carbon Hybrid Tapes are then placed on the resin (making sure the resin has soake
  4. "Width: 80mm | 3.14”Colour: Plan/OrangeBlend: E-Glass and PolyFlex StrandsHybrid TapeThe Hybrid Tapes are custom made (purpose built) for surfboard production and have become the industry standard for strengthening the rails and tail area of surfboards, the area’s most affected by high impact and back foot pressure.We have used surfboard E-Glass and infused coloured PolyFlex Strands to give the Hybrid PolyFlex Tapes a unique kinetic flex pattern that is less stiffer then the Hybrid Carbon Tapes. The PolyFlex strands have a fast recoil rate, that when the board is pushed through a turn it flexs against the boards nature rocker. The PolyFlex strands and E-Glass react and spring the board back to its nature rocker curve and in doing creating speed and adding strength at the same time. Industry Uses:Back Rails Manufactures place the Carbon Hybrid Tapes on the back rail of surfboards to prevent the tails from shattering and strengthening the deck from foot compressions.Bottom of the board The Carbon Hybrid Tapes are also used on the bottom of the surfboards to create additional spring or pop out of the board. This is known as a kinetic flex, as the board is place under pressure while in transition, during or out of a turn the board springs back to its natural curvature and delivers additional speed.Full Rail of the board The Carbon Hybrid Tapes are often used along the full length of the surfboard rail with stringerless surfboards. This is to add additional strength or to replace the strength that a timber stringer would provide, therefore creating a Parabolic Frame. The Parabolic Frame helps prevents the board from twisting which increases the liveliness/responsiveness, this also creates a parabolic flex pattern that allows to board to deliver more drive, speed and power.Lay-ups: The Carbon Hybrid Tapes are used during the lamination process. The tapes are place on the foam before the cloth is laminated. Most manufactures mark the area they wish to place the Carbon Hybrid Tapes, and brush a small amount of resin on the foam (to prevent to the Carbon Hybrid Tapes from moving). The Carbon Hybrid Tapes are then placed on the resin (making sure the resin has soaked thr
  5. Width: 80mm | 3.14”. Basalt Surfboard Hybrid Tape uses Shapers E-Glass surfboard glass and Basalt fibres. Basalt fibres are made from crushed Basalt rocks, which is one of the most commonly found volcanic rock in low to mid lining coast areas. Basalt in considered as an environmentally friendly product, as there no other materials required manufacture and does not need to be treated like other fibres. The manufacturing process is simple, Basalt is sourced, then washed, crushed, melted and then extruded into fibres. Properties: Flex Properties similar to S-Glass with higher Impact Strength; High Impact Resistance; High Tensile Strength; Increases Tail Strength; Naturally UV Resistant; Enhanced wet out ability with resin; Doesn’t em-brittle under high speed impact; Amazing strength-to-weight ratio. Basalt is a great alternative for manufactures that want more tail flex without compromising the natural flex of the foam, also with out loosing integrity of impact and tensile strength.
  6. Width: 80mm | 3.14”. Basalt Surfboard Hybrid Tape uses Shapers E-Glass surfboard glass and Basalt fibres. Basalt fibres are made from crushed Basalt rocks, which is one of the most commonly found volcanic rock in low to mid lining coast areas. Basalt in considered as an environmentally friendly product, as there no other materials required manufacture and does not need to be treated like other fibres. The manufacturing process is simple, Basalt is sourced, then washed, crushed, melted and then extruded into fibres. Properties: Flex Properties similar to S-Glass with higher Impact Strength; High Impact Resistance ; High Tensile Strength; Increases Tail Strength; Naturally UV Resistant ; Enhanced wet out ability with resin; Doesn’t em-brittle under high speed impact; Amazing strength-to-weight ratio. Basalt is a great alternative for manufactures that want more tail flex without compromising the natural flex of the foam, also with out loosing integrity of impact and tensile strength.
  7. Width: 35mm | 1.37”. Basalt Surfboard Unidirectional Tape uses over 90% Basalt fibres that are woven in a vertical format, this allows the full benefits of Basalt to be unitized in areas required. The Unidirectional format also always for the tape to be benefit without crimping. Basalt fibres are made from crushed Basalt rocks, which is one of the most commonly found volcanic rock in low to mid lining coast areas. Basalt in considered as an environmentally friendly product, as there no other materials required manufacture and does not need to be treated like other fibres. The manufacturing process is simple, Basalt is sourced, then washed, crushed, melted and then extruded into fibres. Properties: Flex Properties similar to S-Glass with higher Impact Strength; High Impact Resistance; High Tensile Strength; Increases Tail Strength; Naturally UV Resistant; Enhanced wet out ability with resin; Doesn’t em-brittle under high speed impact; Amazing strength-to-weight ratio. Basalt is a great alternative for manufactures that want more tail flex without compromising the natural flex of the foam, also with out loosing integrity of impact and tensile strength.
  8. Width: 55mm | 2.16”. Basalt Surfboard Unidirectional Tape uses over 90% Basalt fibres that are woven in a vertical format, this allows the full benefits of Basalt to be unitized in areas required. The Unidirectional format also always for the tape to be benefit without crimping. Basalt fibres are made from crushed Basalt rocks, which is one of the most commonly found volcanic rock in low to mid lining coast areas. Basalt in considered as an environmentally friendly product, as there no other materials required manufacture and does not need to be treated like other fibres. The manufacturing process is simple, Basalt is sourced, then washed, crushed, melted and then extruded into fibres. Properties: Flex Properties similar to S-Glass with higher Impact Strength; High Impact Resistance; High Tensile Strength; Increases Tail Strength; Naturally UV Resistant; Enhanced wet out ability with resin; Doesn’t em-brittle under high speed impact; Amazing strength-to-weight ratio. Basalt is a great alternative for manufactures that want more tail flex without compromising the natural flex of the foam, also with out loosing integrity of impact and tensile strength.
  9. Premium Carbon Fiber Tape mixed with Fibreglass and BLUE strands. Width : 8 cm.Ideal for Carbon Parobolic Rails and for strengthening the tail area for back foot pressures
  10. Premium Carbon Fiber Tape mixed with Fibreglass and Blue/Orange/Blue strands. Width : 8 cm.Ideal for Carbon Parobolic Rails and for strengthening the tail area for back foot pressures

por página
Definir direção descendente

Itens 1 a 10 num total de 29

Página:
  1. 1
  2. 2
  3. 3